Sangiacomo Americas Logo



4908 Moores Mill Rd, Suite 100, Huntsville, AL 35811 USA
Tel: + 1.256.275.4701 | Fax: + 1.256.275.4704

Flywheel and back-geared C-Frame eccentric presses

T10 - T75 / T50 - T450

Optionals

SAFETY LIGHT CURTAINS

They can allow an easy access to the working area, thanks to the protection of infrared rays. Programmable version available, in order to meet every need.

MOTORIZED RAM ADJUSTMENT

To facilitate the setting of the distance between the bolster and slide, available on T50 and larger models (standard on T130 and larger models).

RAPID DIE TOOLING

Ball guides, support arms with rollers, and hydraulic die clamps facilitate tooling change overs.

INCLINATION

Available with mechanical or hydraulic (manual or motorized) adjustment, allowing inclinations up to 25°. Larger inclinations are possible and will be provided upon request.

AUTOMATIC STROKE CHANGE WITH NUMERICAL CONTROL

Allows press settings storage in "tool programs" (nearly 2000 programs). When recalling a tool program from the touch-screen panel, the press will be automatically set up (stroke change, speed, distance table-ram, electronic cams, etc..) in less than 2 minutes.

TIE RODS

To increase frame strength


COMPLETE PRODUCTION PLANT

Upon request we can supply complete feeding lines and turnkey solutions.

Technical information

C-Frame flywheel eccentric presses

Press Model Power
[KN]
Nominal speed
[SPM]
Variable speed
[SPM]
Stroke
[mm] - [in]
Table-Ram distance*
[mm] - [in]
Working table
[mm] - [in]
Ram surface
[mm] - [in]
T10 CE 100 190 92-230 6-40 (0,24-1,57) 210 (8,27) 240x360 (9,45x14,17) 90x150
(3,54x5,91)
T15 CE 150 165 88-220 8-60 (0,31-2,36) 260 (10,24) 300x400 (11,81x15,75) 104x230
(4,09x9,06)
T20 CE 200 155 84-210 6-60 (0,24-2,36) 300 (11,81) 300x450 (11,81x17,72) 190x278
(7,48x10,94)
T30 CE 300 145 80-200 8-76 (0,31-2,99) 350 (13,78) 360x580 (14,17x22,83 250x350
(9,84x13,78)
T40 CE 400 145 76-190 8-78 (0,31-3,07) 375 (14,76) 380x650 (14,96x25,59) 250x350
(9,84x13,78)
T50 CE 500 140 72-180 12-110 (0,47-4,33) 400 (15,75) 440x750 (17,32x29,53) 300x450
(11,81x17,72)
T75 CE 750 120 60-130 14-140 (0,55-5,51) 450 (17,72) 500x800 (19,69x31,50) 380x560
(14,96x22,05))

 

C-Frame FLYWHEEL PRESSES: C-Frame presses without reduction gears between the drive shaft and the eccentric shaft are well suited for applications with higher production speeds for increased productivity. Suitable for blanking and stamping.

  • CE Certification
  • Steel frame (cast iron and T10 CE T15 CE)
  • Forged alloy steel shaft
  • Pneumatic clutch-brake combined units
  • Control panel with SIEMENS PLC for the adjustment of all settings and Pilz safety devices
  • Production and preset counters
  • Selector for reverse motion
  • Ram with oil collector and 6 sliding surfaces
  • Automatic and centralized lubrication system with adjustable flow
  • Automatic hydraulic overload protection (mechanical on T30CE and T40 CE)
  • Extractor unit
  • Air counterbalance cylinders

C-Frame back geared eccentric presses

Press Model Power
[KN]
Nominal speed
[SPM]
Variable speed
[SPM]
Stroke
[mm] - [in]
Table-Ram distance*
[mm] - [in]
Working table
[mm] - [in]
Ram surface
[mm] - [in]
T50 RCE 500 80 40-100 12-110 (0,47-4,33) 400 (15,75) 440x750 (17,32x29,53) 300x450
(11,81x17,72)
T63 RCE 630 70 36-90 12-140 (0,47-5,51) 450 (17,72) 500x800 (19,96x31,50); 380x560
(14,96x22,05)
T80 RCE 800 65 34-85 14-150 (0,55-5,91) 480 (18,90) 580x900 (22,83x35,43) 380x560
(14,96x22,05)
T100 RCE 1000 60 30-75 17-180 (0,67-7,09) 520 (20,47) 650x1100 (25,60x43,31) 500x680
(19,69x26,77)
T130 RCE 1300 55 28-70 16-200 (0,63-7,78) 560 (22,05) 700x1200 (27,60x47,24) 540x740
(21,26x29,13)
T160 RCE 1600 50 24-60 15-220 (0,59-8,66) 660 (25,98) 760x1300 (29,92x51,18) 660x850
(25,98x33,46)
T200 RCE 2000 45 22-56 19-230 (0,75-9,06) 750 (29,53) 850x1450 (33,46x57,09) 680x900
(26,77x35,43)
T350 RCE 3500 34 20-50 20-250 (0,79-9,84) 800 (31,50) 1000x1800 (39,37x70,87) 880x1250
(34,65x49,21)
T450 RCE 4500 34 22-50 20-250 (0,79-9,84) 850 (33,46) 1000x1800 (39,37x70,87) 900x1400
(35,43x55,12)

 

C-Frame BACK GEARED PRESSES: C-Frame presses with an intermediate reduction gear provide higher tonnage at reduced nominal speeds. Suitable for blanking and stamping and deep drawing.

  • CE Certification
  • Steel frame
  • Forged alloy steel shaft
  • Pneumatic clutch-brake combined units
  • Control panel with SIEMENS PLC for the adjustment of all settings and Pilz safety devices
  • Production and preset counters
  • Selector for reverse motion
  • Oil bath lubrication for gears
  • Ram with oil collector and 6 sliding surfaces
  • Automatic and centralized lubrication system with adjustable flow
  • Automatic hydraulic overload protection
  • Extractor unit
  • Air counterbalance cylinders
  • Motorized ram adjustment

 

*Adjustable strokes per minute optional
**Measured at the top dead point with max stroke and ram regulation

Sangiacomo Americas is a distributor of a wide range of products including c-frame presses which are built to suit your company's needs. Are you looking for a cheap c-frame press? Contact us via our contact page or give us a call for a free consultation. Whether you're in North America or South America, we can provide you with the best c frame press the industry has to offer. Our C-Frame mechanical presses, produced in a wide range of models, include Flywheel and back-geared models. Please take some time to look at the specs above and give us a call when you are ready to order. We are confident we can provide you with the best c frame mechanical press that will work for you.

A leading company in the production of C-Frame and
straight-side eccentric mechanical presses